Po Ly Gim Machinery Co., Ltd.
*Click to play video 
MACHINE FEATURES:
 |
Y axis design with tool holder instead of power turret. It can setting up as below:
|
 |
 |
| Spindle mounting collet chuck | Part catcher |
MACHINE SPECIFICATIONS:
| ITEM | UNIT | MINI-88Y |
| Max. turning dia. | mm | 25 |
| Max. turning length | mm | Bar diameter x3 |
| X Axis | mm | 165 |
| Z Axis | mm | 190 |
| Y Axis | mm | 148 |
| Spindle hole | mm | 34 |
| Bar capacity | mm | 26 |
| Spindle nose | mm | Ø 85 |
| Collet Type | mm | 161E/25 |
| Spindle motor | h.p. | 2.2kw / 3 |
| X,Z,Y Axis motor | kw | 0.75 |
| Cross and front off-center driven tools motor | kw | 0.4 |
| Spindle speed (rpm) | r.p.m | 100-6000 |
| Cross spindle speed | rpm | 200-6000 |
| Front off-center driven tool speed | rpm | 200-6000 |
| Spindle Indexing | degree | 5 |
| Rapid traverse speed (X,Z,Y axis) | M/MIN | 18 |
| Min. input unit | mm | 0.001 |
| O.D. Tooling | - | 6 |
| O.D. Tool dimension | - | □12 X 12 X 100 |
| I.D. Tooling | - | 4 |
| I.D. Tool dimension | mm | Ø 20 |
| I.D. Tool Max. drilling dia. | mm | Ø 20 |
| I.D. Tool Max. tapping dia. | - | M8 |
| Cross driven tooling | - | 4 |
| Cross driven tooling dimension | mm | 10mm(ER16) |
| Cross driven tool Max. drilling dia. | mm | Ø10 |
| Cross driven tool Max. tapping dia. | - | M8 |
| Front off-center driven tooling | - | 4 |
| Front off-center driven tool dimension | mm | 10mm(ER16) |
| Front off-center driven tool Max. drilling dia. | mm | Ø10 |
| Front off-center driven tool Max. tapping dia. | - | M8 |
| Coolant pump | HP | 1/2 |
| Hydraulic pump | HP | 1/2 |
| Dimanesion | cm | 142x121x171 |
| Weight | kgs | 1158 |